1 Introduction / 1.4 Lift the Vehicle | PDF pages 14-14

1.4 Lift the Vehicle

Note the Condition of Vehicle When jacking

1. Principle: Be sure to jack the vehicle in no-load state; Never

jack the vehicle in loaded state.

2. The center of gravity of the vehicle will shift after removal of

drive motor, high voltage battery box and other heavier

parts. Make sure the vehicle supported properly to prevent

the vehicle from overturning.

Precautions for Using Jack and Jack Stands

1. Be sure to follow the instructions in this manual for safe

operation.

2. Never attempt to lift the tire with a crowbar so as to avoid

damaging the wheels and tires.

3. Park the vehicle on level road surface and pull the parking

brake.

4. Be sure to block the wheel on the other end of the diagonal

that connects this wheel with the jacking position.

5. Use a jack with a rubber pad to jack the vehicle.

caution

If required, after jacking the vehicle with a jack,

support the vehicle using a jack stands with rubber

pad.